We are proud to present our newest rc glider, the DIANA 3
perfect scale 1:4 - full composite - Wingspan: 4.50 Mt - Weight from 4.9 Kg - Airfoil: Hn Family
Glider or Motor Glider as the original one, as you like!
 
The real Diana 3 is an extraordinary and stilish Glider but also a great Motor Glider produced by the scandinavian company Diana Sailplanes.

Glider_it Diana 3 is our perfect scale 1:4 RC reproduction which expresses all the features and stylistic lines of the original one including the possibility of electric motorization with FES.
Thanks to its HN modified airfoil developed and optimized directly by our staff derivating from the well known Norbert Habe, a wide speed range is possible with this model.
 
Glider_it has started with the Jeemo a new path to further increase its quality of workmanship, and the simplicity of assembly for the end user.
Diana 3 follows this new path, presenting itself immediately as an extraordinary protagonist of 2022.

Our Diana 3 is a full composite kit, the wings will require only to glue the control horn and mount the servos without any other work.
Flaps and ailerons are already top drive prepared and hinged in the mould, elevator also is pre hinged in the mould.
We will offer as an option:
- Fuselage ready-to-install for the retractable landing gear.
- Canopy already glued to the frame, painted and ready to be installed

Glider_it Diana 3 is available in 2 different versions, both made in our Extralight technology:
-FS Wings made in fiberglass with carbon spar and single heavy carbon layer
-FS Performance Wings made in fiberglass with carbon spar and single light HM carbon layer, suitable for lighter conditions.

Price is 2000,00 €  VAT included for both versions.

As for all our models we will also be able to supply specific transport bags, the possibility to choose your own paint scheme, the de-luxe fuselage and the visible carbon option.

Technical Data 

   Unit of Measure Value
Wing span: mm 4.500 
Fuselage length: mm 1.600 
Wing area: dm2 67
Weight (FS version  glider config.): ∼kg 5,9 
Weight (FS Performance version, glider config.): ∼kg 4,9 
Wing load (Glider Vers. Performance) g/dm2 73
Wing airfoil: n/a Mod. HN

Technical Setup 

Suggested servos setup  Brand Type Max Thickness
elevator: KST BLS651 20 mm
rudder: KST  BLS651 20 mm 
tip ailerons: KST X8 8 mm
ailerons: KST  X10  10 mm 
flaps: KST  X10  10 mm 

 

Suggested engine setup    
Battery cell: Lipo  6S
Battery capacity: mAh  3400
Controller: Castle Edge lite, Ah  100 Ah
Engine: LEOFES L4625-445
FES*: - -
Propeller: - 14 x 10

Diana 3 Model Configurator