We can finally reveal another of our new wonderful cards: the JEEFAN 😉
It was possible by the great experience of the team Glider-it team development department and the ready-to-fly assembly work of the CNC-Luftsporttechnik staff in the person of Steve Streff , a great professional!
Following the experience of Jeemo, We also wanted to satisfy those who don't like kerosene turbine flying but love EDF flight.
In a glider the retractable fan has been used for some time, but for obvious reasons, compromises flight and aesthetic lines...
We wanted to find a solution that would satisfy these pilots: The fan had to be inside!
Here is the JEEFAN 😲😮😲 born from the rib of the "twin brother" JEEMAX but with different development to meet the needs of the EDF world , It can host the Fan100 mm and 14S lipo.
Below some pictures of models in Yellow prototype color, but now we can create a new dress for him 😁😁😎

JeeFAN is capable of taking off from the ground thanks to its landing gear and can also be used on asphalt runways for landing!, carbon square wing joiner and hinge on the bottom.
JeeFAN immediately demonstrated great aerobatic flying skills both with engine and gliding, and a formidable handling.

With JEEFAN you can Fly on flat fly field , or on the slope

The kit is highly prefabricated and takes a few hours to fly:
- You must insert the EDF100mm (not provided)
- Install your servos using the frames (provided)
- Make the wiring and connections.
We can also carry out all the assembly phases for you.

Basic price start from 2000€ for 1 color JeeFAN 


Technical Data 

   Unit of Measure Value
Wing span: mm  3500
Wing area: dm2 91
Fuselage length: mm 1980
Weight (FS, extralight tech.):  kg 9
Wing load (FS, extralight tech.): g/dm2 90
Wing airfoil: n/a Dev by Glider_it


   Unit of Measure Value
EDF FAN mm 100mm

Technical Setup 

Suggested Servos Setup  Brand Type Max Thickness
elevator: KST  X10 Pro 10 mm 
rudder: KST  A12  12 mm 
ailerons: KST  A12  12 mm 
flaps: KST  A12  12 mm 
landing gear: KST A12 12 mm



Pre-order available! - Click on follow next steps