Stingray
The Glider_it Stingray is the first and the only one Stingray coming directly from the mind and the pencil of Ing. Giuseppe Ghisleri, one of the most capable Italian RC designer, model builder and pilot.
The Stingray is a pure and amazing acrobatic glider able to satisfy those pilots who really look for extreme performance and fun to fly. Its flight is fast, precise and able to perform all the most imaginative acrobatics without never being critical.
Wings are equipped with both ailerons and flaps used for different camber settings and butterfly while a 16mm steel wing joiner guarantees an outstanding robustness.
Starting from 2020, the new EVO version will be introduced on the market with bottom hinged flaps and ailerons, allowing top drive system and an higher throw for flaps.
Technical Data
Unit of Measure | Value | |
---|---|---|
Wing span: | mm | 2.900 |
Wing area: | dm2 | 66 |
Fuselage length: | mm | 1.750 |
Weight (OD, glider conf.)*: | ∼kg | 5,6 |
Weight (OD, extralight tech., glider conf.)*: | ∼kg | 4,9 |
Wing load: | g/dm2 | 75 |
Wing airfoil: | n/a | Mod. S6061 |
Technical Setup
Suggested servos setup | Brand | Type | Max Thickness |
---|---|---|---|
elevator: | KST | BLS651 | 20 mm |
rudder: | KST | BLS651 | 20 mm |
ailerons: | KST | X10 | 10 mm |
flaps: | KST | X10 | 10 mm |
Suggested engine setup | ||
---|---|---|
Battery cell: | Lipo | 5s |
Battery capacity: | mAh | 5.000 |
Controller: | Castle Edge lite, Ah | 100 |
Motor: | Leomotion | L4031-2550 finned 6,7:1 |
FES: | LeoFes | quick link 6 mm shaft |
Propeller: | Leomotion | Carbon propeller 18x13 |