We can finally reveal another of our new wonderful cards: the JEEFAN
It was possible by the great experience of the team Glider-it team development department and the ready-to-fly assembly work of the CNC-Luftsporttechnik staff in the person of Steve Streff , a great professional!
Following the experience of Jeemo, We also wanted to satisfy those who don't like kerosene turbine flying but love EDF flight.
In a glider the retractable fan has been used for some time, but for obvious reasons, compromises flight and aesthetic lines...
We wanted to find a solution that would satisfy these pilots: The fan had to be inside!
Here is the JEEFAN born from the rib of the "twin brother" JEEMAX but with different development to meet the needs of the EDF world , It can host the Fan100 mm and 14S lipo.
Below some pictures of models in Yellow prototype color, but now we can create a new dress for him
JeeFAN is capable of taking off from the ground thanks to its landing gear and can also be used on asphalt runways for landing!, carbon square wing joiner and hinge on the bottom.
JeeFAN immediately demonstrated great aerobatic flying skills both with engine and gliding, and a formidable handling.
With JEEFAN you can Fly on flat fly field , or on the slope
The kit is highly prefabricated and takes a few hours to fly:
- You must insert the EDF100mm (not provided)
- Install your servos using the frames (provided)
- Make the wiring and connections.
We can also carry out all the assembly phases for you.
Basic price start from 2000€ for 1 color JeeFAN
Technical Data
Unit of Measure | Value | |
---|---|---|
Wing span: | mm | 3500 |
Wing area: | dm2 | 91 |
Fuselage length: | mm | 1980 |
Weight (FS, extralight tech.): | kg | 9 |
Wing load (FS, extralight tech.): | g/dm2 | 90 |
Wing airfoil: | n/a | Dev by Glider_it |
Engine
Unit of Measure | Value | |
---|---|---|
EDF FAN | mm | 100mm |
Technical Setup
Suggested Servos Setup | Brand | Type | Max Thickness |
---|---|---|---|
elevator: | KST | X10 Pro | 10 mm |
rudder: | KST | A12 | 12 mm |
ailerons: | KST | A12 | 12 mm |
flaps: | KST | A12 | 12 mm |
landing gear: | KST | A12 | 12 mm |